Production resources

Omicron’s investment in innovation –aimed at having the most advanced, cutting-edge technical means – contributes to increased productivity and time saving.

Our work is based on our commitment to satisfying our customers. The list of our means of production is a guarantee of top-quality machining.

Our work is based on our commitment to satisfying our customers

Medios de producción de Omicron (1) Medios de producción de Omicron (1)
Medios de producción de Omicron (2) Medios de producción de Omicron (2)
Medios de producción de Omicron (3) Medios de producción de Omicron (3)
Medios de producción de Omicron (4) Medios de producción de Omicron (4)
Medios de producción de Omicron (5) Medios de producción de Omicron (5)
Medios de producción de Omicron (6) Medios de producción de Omicron (6)
Medios de producción de Omicron Medios de producción de Omicron

Machining capacity

Turning Parallel lathes

  • Up to 837 x 11.000 cm external
  • Up to Ø550 x 6.000 cm internal

Dies

  • Ø 500 mm interior

Turning CNC lathes

  • Up to Ø800 x 5.000 cm

Lapping

  • Ø 24 mm. A Ø 550 mm X 15.000 mm

Cutting

  • Ø 440 mm

Milling

  • 1300 mm table length. Drilling up to 450 mm

List of Machinery / Equipement

CNC LATHES

CMZ 30 LATHE

  • Equipped with Fanuc Control 32iT
  • Turning Diameter 550 mm.
  • 315/95 mm diameter dish.
  • Longitudinal travel 866 mm.

CMZ 35 LATHE

  • Equipped with Fanuc Control 32iT
  • Turning Diameter 550 mm.
  • 315/95 mm diameter dish.
  • Longitudinal travel 1350 mm.

BOST T3-1200 Mod. LATHE

  • Equipped with contro Fagor 8050 TC
  • Distance between centers 5000 mm.
  • Height of centers 600 mm.
  • Swing over bed 1250 mm.
  • Swing over cross slide 800 mm.

GURUTZPE Mod. 1000/2 LATHE

  • Equipped with Control Fagor 8055 TC
  • Distance between centers 3000 mm.
  • Height of centers 600 mm.
  • Swing over bed 1000 mm.
  • Swing over cross slide 700 mm.

DANOBAT Mod. NI-650 LATHE

  • Equipped with Control Fagor 8055 TC
  • Turning Diameter 330 mm.
  • Cross travel 350 mm.
  • Longitudinal travel 530 mm.

DANOBAT-LEALDE Mod. TCN-12 EP750 LATHE

  • Equipped with Control Fagor 8055 TC
  • Maximum permissible Diameter above transversing slide 505 mm.
  • Distance between spindle nose and counterpoint 1050 mm.
  • Diameter of shaft 91 mm.
  • Tour of the longitudinal slide 775 mm.
  • Cross slide travel 308 mm.

LATHES REVOLVERS

HERBERT No. 7 LATHE

  • Inner diameter 108 mm screw.
  • Flip maximum 760 mm.
  • Max 533 mm Swing over carriage.
  • Maximum distance from spindle to face the turret 1505 mm.

HERBERT MOD. 9C-30 LATHE

  • Inner diameter 108 mm screw.
  • Flip maximum 760 mm.
  • Max 533 mm Swing over carriage.
  • Maximum distance from spindle to face the turret 1505 mm.

LATHES

AMUTIO-CAZENEUVE Mod. HB-575 LATHE

  • Height of centers 250 mm.
  • Diameter 575 mm maximum above the bed.
  • Dimatro maximum over carriage 300 mm.
  • Distance between centers 1500 mm.
  • Equipped with display.

AMUTIO Mod. HB-725 (DELTECO)LATHE

  • Height of centers 315 mm.
  • Diameter 725 mm maximum above the bed.
  • Dimatro maximum over carriage 670 mm.
  • Distance between centers 2000 mm.
  • Equipped with SONY display.

ETXEA / BOST Mod. DN-500 LATHE

  • Equipped with copying.
  • Distance between centers 12000 mm.
  • Height of centers 525 mm.
  • Diameter of turning above the bed 1050 mm.
  • Diameter of turning between carriage 700 mm.

Echea-9000 Mod. RA 360 LATHE

  • Distance between centers 9000 mm.
  • Height of centers 360 mm.
  • Turning diameter to 720 mm above the bed.
  • Diameter of turning between carriage 500 mm.

GURUTZPE BT LATHE

  • Distance between centers 2000 mm.
  • Height of centers 500 mm.
  • Turning diameter to 800 mm above the bed.
  • Diameter of turning between carriage 550 mm

500 SCULFORT SUPERCAP LATHE

  • Distance between centers 10000 mm.
  • Height of centers 500 mm.
  • Diameter of turning above the bed 1030 mm.
  • Diameter of turning between carriage 770 mm.

TOS YOUR 125H LATHE

  • Distance between centers 10000 mm.
  • Height of centers 500 mm.
  • Diameter of turning above the bed 1030 mm.
  • Diameter of turning between carriage 770 mm.

GURUTZPE SUPER BT LATHE

  • Distance between centers 10000 mm.
  • Height of centers 500 mm.
  • Diameter of turning above the bed 1030 mm.
  • Diameter of turning between carriage 770 mm.

GRINDING MACHINE-HONING

HORIZONTAL HONING SIM-500-8000

  • Maximum length 8000 mm.
  • Diameter 30 mm minimum.
  • Diameter 500 mm maximum.

UNIVERSAL MILLING

MILLING HURON MU-5

  • Table 1635 x 460 mm.
  • Longitudinal Course 11300 mm.
  • Cross Course 600 mm.
  • Course 500 mm vertically.

VERTICAL MILLING

MACHINING CENTER DOOSAN Mynx

  • Table 1400 x 340 mm.
  • Longitudinal Course 1100 mm.
  • Cross Course 300 mm.
  • Course 500 mm vertically.

VERTICAL MACHINING CENTER

MACHINING CENTER DOOSAN Mynx

  • Carousel 24 ISO 50 tool holder.
  • Longitudinal stroke (X axis) 1525 mm.
  • Cross Race (Y axis) 762 mm.
  • Vertical stroke (Z axis) 825 mm.